JM Roofing & Siding

Are you thinking about getting a home warranty? In celebration of National Home Warranty Day, we’re going to be going over how home warranties differ from homeowners’ insurance to help lead you in the right direction.

What you need to know about homeowners’ insurance:

Homeowners’ insurance is what will cover you in the event of accidental damage that occurs to your home and personal belongings resulting from fires, storms, theft, and even possibly natural disasters.

The four main areas covered under homeowners insurance:

• Loss or damage
• Personal property in case of theft
• The interior and exterior of your home
• General liability that may surface when a person is injured while on your property

In general, it is mandatory to have homeowners’ insurance, and it is usually required by a bank prior to obtaining a mortgage on your home. The average annual cost can range from $300 to $1,000, and all policies provide a deductible.

What you need to know about home warranties:

A home warranty is a service contract that will cover you in situations where your appliances or system components stop working properly because of wear and tear or age.

Components covered by a home warranty include:

• Plumbing
• Electrical
• HVAC
• Kitchen appliances
• Washer and dryer
• Pool and spa

Unlike homeowners’ insurance, home warranties are not required to obtain a mortgage for your home. Contract terms for home warranties typically last 12 months and are usually around $75 per month for coverage on systems and appliances. Although having homeowners insurance isn’t required, it is one of the smartest purchases you can make for your home because it will save you a lot of money in the long run.

If you have appliances that are high-value (or a plumbing system prone to breaking down), warranties are a way of regulating your budget to account for life’s big disasters.

And who doesn’t want a more predictable budget?

The roof of your home is one of the most important features of any home. If you want a new roof, or you want to renovate the one you have, you need to understand the different roofing materials. Keep in mind that this is a decision that will affect your home and those living in it for years to come. New roofing is a high-value but expensive investment, so take your time before making a commitment.

Over the years, different materials have been used to roof houses. What are the benefits of the materials used to roof today over those used a century ago? Here are how today’s roofing materials have the edge over older roofing materials.

Uniqueness

About one century ago, clay tiles were the premium choice for roofing “modern” homes. Clay tiles were preferred over other materials because they were fireproof. This gave home owners some comfort. However all the roofs looked similar, so it was monotonous to look at. In addition, clay tiles were prone to shattering and requiring replacement every few years.

Today, there are various roofing materials such as asphalt shingles, wood shingles, and others. They all come in different colors as well as types, giving homeowner a choice of what they prefer.

Lightweight

Materials used in the past were quite heavy. The building structure must have been able to handle the weight of the roof. They therefore had to spend more money ensuring that their building was stable and could handle the weight or they risked crumbling of the roof.

Today’s roofing materials are quite light. For example, take an asphalt roof—which weighs anywhere between 225 to 325 pounds per square.

Durability

A century ago, they did not have the technology to manufacture tiles that were as durable as today’s options. They used to use materials that were brittle and more likely to need replacing within a few years. Today, there are many roofing materials that homeowners can use.

You are not limited to just one kind of roof—whatever you’re looking for, JM Roofing & Siding is happy to help you create a beautiful and long-lasting result.

When a homeowner finishes a remodel, it’s one of the most rewarding feelings they’ll ever experience. At the same time, remodeling can be a drain on us—both physically and financially. Common issues like delays, the cost of equipment, and structural changes will drive the cost of your remodel through the roof (so to speak).

If you want to make sure your project stays within your means, here’s what you need to do:

#1: Research Research Research!

First and foremost, do your research! Know exactly what you want before lifting a hammer, and stick to it! Research the various qualities of products involved and select the best you can afford. Shop around for the highest-value pricing (which doesn’t mean “most expensive”). Talk to more than one vendor to see if any are willing to make deals on cost, and be very cautious when you hear the words “refurbished.”

Occasionally, you can get lucky and find a great product, but it may not have a warranty. Be sure if you purchase “as-is” that you are comfortable with the cost of replacing it earlier than you expect. Take advantage of yearly sales (such as Black Friday sales) for major purchases, even if it means putting them in storage for a while until needed.

However, don’t buy something just because it’s on sale. Making sure you’re only buying what you need is why you’ll want to know exactly what you want before you start.

#2: Build a Specific Budget

Second, compartmentalize your spending based on when each phase of the remodeling is to be done. When remodeling the kitchen in your home, normally the first stage in rebuilding will be your cabinetry, second will be appliances, and the last stage will include new flooring. Set up your budget based on the quality you want at each stage.

#3: Keep the Budget Balanced

If you overspend in one area, make sure you cut back in the next. In our experience, this is where most people stress out. They opted for custom cabinets instead of pre-made, which is what was budgeted. Then they chose high end appliances for their kitchen after having budgeted for mid-quality.

They were so pleased with how it looked and wanted 3/4″ hardwood planks to finish it off—but could only afford laminate. If you overspend throughout, by this point you have only two choices: opt for overspending altogether or buy inferior quality for your last items. Neither choice will make you happy.

If you can do these three things, you’ll finish your project with “complete” satisfaction. Stay focused and good luck!

If you notice your heating or cooling bill skyrocketing, it may be time for you to change your attic insulation. There are a few different signs that tell it’s time to have your insulation replaced.

Standard insulation starts to degrade and start peeling from walls after about 15 years. If you have an older home, chances are the attic insulation is the same insulation that was installed when the house was built.

Insulation should also be replaced, in some cases sooner than 15 years, if it is no longer doing its job properly. You’ll know it needs to be replaced if there are insulation leaks or if it is peeling from the walls.

Signs My Attic Insulation Needs to Be Replaced

If you don’t know how old your attic insulation is, there are a few signs that can tell you it is time to have your insulation replaced.

• Issues With Heating Or Cooling – If you have to blast the heater or the AC at all times to keep your house at comfortable temperatures, this is a good sign that the insulation is failing to trap the cold or hot air and should be replaced.
• Drafts – If you notice cool drafts, this means your insulation isn’t properly keeping the air outside from entering the house and needs to be replaced.
• Mold or Wet Insulation – If your insulation is continually damp or you have noticed mold on your insulation, you should have the insulation removed, your attic inspected and repaired, and then new insulation installed.

Types of Insulation

There are a few different types of insulation you can choose from.

• Batt Insulation – This is probably the most common type of insulation. It is made from fiberglass or natural fibers and reliably captures (or keeps out) heat.
• Spray Foam Insulation – Spray foam insulation is insulation that is sprayed into an area and then expands to fill the area. It is very effective at insulating, especially if you are insulating hard-to-reach areas.
• Reflective Insulation – This type of insulation reflects heat or cold and is usually made from reflective materials or cardboard.

If your roofing is allowing cold air in or allowing warm air to escape, JM Roofing & Siding is happy to check out your roof and diagnose the problem. Contact us today for a consultation on your home.

Even the sturdiest foundations need some TLC. The rock upon which your house is built is one of the sturdiest parts of residential construction. While paint, plumbing, or roof shingles are meant to last 10 years at most, a good foundation will last for 20, 30, or 40 years at least. Even so, your foundation requires maintenance and attention if you want your home to keep it’s value!

The signs of an aging or crumbling foundation are easy to miss if you’re not paying attention. However, today’s blog is for those who are paying attention—who want their homes to last for decades (or want a high asking price when they sell).

Aging Foundations: What to Look For

The #1 enemy of your foundation is moisture. A leaky pipe or poor drainage can erode the strongest, sturdiest foundation in the world. If the Grand Canyon was made from the flow of water, then water can certainly destroy your foundation.

Signs of moisture (and other issues) include:

• Being able to chip the foundation with a screwdriver
• Cracks in ceramic flooring above a concrete surface
• Misaligned doors that jam or fail to catch
• Windows that no longer close or close incompletely
• Puddles forming in your crawl space
• Cracks in the walls coming up from the floor

Foundations should be straight, so your walls should not be leaning. If you use a level and find that your walls are sitting at an angle, your foundation may have shifted beneath your home. The foundation itself should be absolutely solid—if you can chip or alter it in any way with a hand tool, then the foundation is likely already eroded in other spots.

If you see signs of erosion, call a contractor as soon as possible! As a roofing and siding company, we’re more than happy to answer your questions and help you protect your home’s value.

Hands-down, the absolute best way to protect your home’s value is regular maintenance. Researchers have found that homes that received regular maintenance were able to add an additional 1% of their home’s value every year. On the other hand, homes that received little-to-no maintenance prematurely aged, taking 10% off of the value when it came time to sell.

Here’s the thing:

Maintenance costs add up, and maintenance by definition is not immediately urgent. Families all over the U.S. are burning their earnings and value because they’re fixing home emergencies instead of preventing them.

So what’s the big change you need to make in 2018?

You need to start a maintenance budget.

How Much You Need to Set Aside for Home Maintenance

There are three schools of thought about saving for home maintenance: the House Price rule, the Square Foot rule, and the Combo rule.

The House Price rule is simple: your annual maintenance budget should be 1% of what you paid. So if you paid $450,000 for your house, you should save $4,500 a year.

The Square Foot rule is also simple: your annual budget should be $1 for every square foot of your house. So if your house is 2,400 square feet, that’s $2,400 a year.

The Combination rule takes two steps because it’s the average of the two amounts above. So if you paid $450,000 for a 2,400-square foot home, your annual maintenance budget is $3,450. Keep in mind that no matter what rule you end up using, you’re not going to spend your budget every year. Instead, you’ll save it in a fund for when you need it.

Factors to Add to the Mix

Not all homes need the same amount of maintenance. Weather, climate, age—these all affect how much you’ll spend on repairs and upkeep. On top of the rules above, there are some factors you’ll need to consider (and add to your budget).

Add 10% to your annual budget for each of the following items that are true for your home:

• Is in a floodplain or at the bottom of a hill
• Is over 20 years old
• Was not well-maintained by prior owners
• Is in a place that reaches freezing temperatures
• Is a single-family home (not a condo or duplex)

So if your home is local to us (Norwalk, CT), then you should already tack on an extra 10%. That would make the total annual budget for our imaginary home $3,755 (using the Combo rule).

If there’s one thing you should know from following JM Roofing & Siding, it’s that we care about protecting every home’s value. It’s not only good for you—it’s good for your neighbors and for the local economy. When your house wins, everyone wins.

Our mission is to help homeowners save money while increasing the value of their houses, so we want to help by equipping you to clean your siding. Just a few minutes of vigilance (and a couple hours of hard work) once a season will protect your home from damage and maintain its curb appeal! Learn how to clean and inspect your siding below.

How to Spot Siding Damage

The worst thing that can happen to your siding is moisture getting inside and behind it. The water (which isn’t visible at first) freezes in winter, expanding and damaging the joints and connections of the siding. Spotting the signs will help ensure that repairs can be made quickly (and cheaply).

Here’s what you’re looking for:

• Cracked caulking
• Expanded caulking pulling away from gaps
• Wood: peeling paint and cracking boards/trim
• Stucco: cracks and chips
• Brick: deteriorating mortar

Once you’ve inspected your siding or had the necessary repairs completed, it’s time to clean.

How to Clean Your Siding for Cheap

Here’s what you’ll need to buy from the nearest hardware store:

• Trisodium phosphate
• Soft-bristle brush with a long handle

First, mix ½ a cup of trisodium phosphate with a gallon of warm water. Once soapy, you’re ready to go.

Second, mentally divide your siding into 10-foot sections. Focusing on one section at a time helps ensure that you’re cleaning thoroughly (and allows you to take breaks and pick up where you left off).

Third, dip the brush and clean from the bottom to the top. Once done, move on to the next section (and repeat until finished).

How to Clean Mildew Off Your Siding

Mildew looks like black, spotted stains that won’t go away no matter how hard you scrub. To see if it’s mildew, dip a cotton ball in some watered-down bleach. If the black spot disappears after touching it with the bleach, it’s mildew.

Mix four parts water to one part bleach, put on a mask and gloves, and scrub the mildew with the soft-bristled brush. Make sure you don’t get the bleach mixture near any plants you want to keep.

With this short guide, you’ll be on your way to protecting your home’s value and appearance for years to come! If you have any questions, call a roofing expert at JM Roofing & Siding today: (203) 299-0716.

Regular exercise and home maintenance are vital for the same reason: a little effort today prevents a lot of pain tomorrow. Taking care of your home is not only an investment in your house—it’s an investment into your family’s financial stability. Real estate expert Mark Strickland reports that homes that are neglected or out-of-shape for their age lose up to 10% of their appraised value.

For most residents in Connecticut, that’s a loss of $24,000 or more.

So, what’s the single greatest threat to your home’s long-term health?

Moisture.

Water damage is one of the most costly threats your home faces, but thankfully, the signs of moisture damage appear early—as long as you stay vigilant.

The 5 Questions You Need to Inspect Your Home for Moisture

Once a season (or frequently during heavy rains), do a cursory inspection of your home for moisture damage. It should only take you about 30 minutes to answer all 5 questions—and once they’re answered, you should have a pretty good idea of the shape of your home.

• Are your gutters clogged or overflowing?
• Is water flowing toward or into your home?
• Do your basement walls have dark stains on them?
• Does your window caulking have cracks or gaps?
• Are the back of your cupboards showing signs of mold growth?

Homes are (ideally) designed to let water flow away from your home. When they don’t, it leaves your home open to damage. Clogged gutters, dark stains on your basement walls, and cracks in the caulking are all risk factors (or symptoms) of moisture getting into your home. Don’t let it happen.

Don’t procrastinate if you see any issues from the 5 questions above—call a handyman or roof repair service immediately to take care of it.

Do Seasonal Checks of Your Water Appliances

Every time daylight savings rolls around, set aside a day to check all appliances that use water, especially your:

• Washer
• Refrigerator
• Water heater
• HVAC system

As long as you’re staying on top of your home’s upkeep (and keeping moisture out), you’ll be able to maintain your home’s value—and maybe even increase your asking price if you sell.

Freshly-fallen snow is beautiful, but honestly, sometimes you just need to get to work—and ice and snow all over your car and walkway is another 15 minutes of time you don’t want to spend. To prevent ice buildup (or to get rid of it quickly), check out our 5 snow management tips below—most of which can be done using household items you already have!

#1: Put Pickle Juice in a Spray Bottle for a Spray Deicer

Salt is a well-known deicing tool, but not all of us have deicing salt sitting around our garages. Sometimes a cold snap takes us by surprise and leaves ice all over our windshields (where abrasive table salt might do some damage).

The fix? Pour briny pickle juice into a spray bottle. The salt in the pickling liquid acts as a non-abrasive deicer. Just spray all over your windshield, then wipe down with a towel.

#2: Put Salt in an Old Sock & Wipe Down Glass Surfaces

Okay, you don’t want to damage your windshield or windows, but you also don’t like pickles. Not to fear! We have a solution for you. Go ahead and pour some regular table salt into a sock the night before you’re expecting ice or snow. Wipe down your windshield, windows, and mirrors softly.

Use this sparingly, though. Doing this too often will cause damage to your car. If you’re going to be using deicing salt a lot (or for a lot of surfaces), we recommend buying a bag at a local hardware store or Walmart.

#3: Use Rubbing Alcohol on Windows to Prevent Ice & Fogging

This is great for windows around the house. Spray some rubbing alcohol on your windows and wipe down with a clean towel. Bonus: this will leave your windows clean and streak-free, in addition to preventing the glass from fogging up.

#4: Lay Out an Industrial-Strength Tarp at Night

Instead of spending time blowing away or shoveling snow from walkways/off cars, just cover them both with a strong tarp. Once you’re ready to leave, you just drag the tarp to the side and voila! Instant walkway. This only works when you’re expecting snow, so make sure you check the forecast and lay out the tarp before you go to bed.

#5: Keep a Bucket of Fireplace Ashes in Your Car for Traction

This tip makes great use of something you wanted to get rid of anyway: fireplace ashes. During the winter months, drivers have to keep an eye on where they park. Snow and dirt create loose slurries of mud that prevent tires from moving forward. When mixed with mud/slush, fireplace ash creates a thick mixture that’s easier to drive out of when you’re in a jam. Instant traction!

This tip also works well with kitty litter, in case you don’t have a fireplace.

There you have it: 5 fast, easy ways to remove ice (or get moving) as quickly as possible. If you have any other tips, comment on our Facebook page here!

Home decor blogs have two effects on people: the first one is the initial “oh that’s so cute/fun/cool!” when they see a finished project. Usually followed by the realization that our homes will never look like the holiday-themed model homes we see in magazines and on Instagram accounts.

Not to worry! The good folks at JM Roofing may not be professional decorators, but we know how hard it is to make time to decorate our homes (and have them look good by the end).

Below, we’ve gathered 6 of the best (as in, best-looking in the least amount of time) DIY Christmas decorating projects. We hope you try a couple out (and relieve some pressure in the process)!

#1: Turn Your Entrance Into a Gift

We started easy on this one: all you need is two pieces of long fabric and a large, festive bow (available pretty much anywhere).

Source: https://pin.it/nzvofap4igqgoh

#2: Make a Candy Cane Wreath

We have a theory that only 3% of candy canes ever get eaten. Here’s what you can do with the other 97%! All you need to make a pretty wreath for your door is some string, a snowflake decoration (for the center), a ribbon for hanging, and 16 candy canes.

Source: https://pin.it/5mu2kimuspicuz

#3: Word Art (feat. a 3-Letter Word)

You can’t get much easier than the word “joy” when it comes to word art. Buy a “J” and a “Y” from a home decor site, and make a wreath out of leftover Christmas ornaments. All you need is some glue, and boom! Instant Instagram and Facebook cred.

Source: https://pin.it/rg2zgumhhdhxvu

#4: Use Leftover Boxes to Create a Pile of Gifts in Your Entrance

The human brain is actually hardwired to see piles of wrapped boxes as festive.*

*not actually true, but you get what we’re saying.

With all the empty boxes from your online shopping, you can create an awesome display of decorative wrapped gifts outside your doorway in no time (and get rid of clutter around the home). Just get some wrapping paper and some bows from Walmart, and you’ll be in business. Extra credit if you place the boxes in the center of a wreath or some garlands.

Source: https://pin.it/o3yzjqstpjpymk

#5: Fill Shutter Slats with Garlands

Have leftover garlands from Project #4? If you have shutters, use them! Just place garlands through and in the shutters as a homey, holiday-themed invasion of your windows.

Source: http://www.myhomeideas.com/?&Ntt=entryways&N=8255&view=gallery&sp=mostrecentedit&iid=newsletter-120320-entryway-statement&ad=5&dir=back&No=31

#6: Place All Your Christmas Cards on the Door in a Tree Shape

This is quite possibly the easiest project on the list—and it has multiple benefits! Gather up all of your Christmas cards from years past (or this year, if you’re popular), and tape them to the inside of your front door in a tree shape. It’s a decorative way to remind yourself of all the loved ones in your life (while getting rid of the piles of Christmas cards you have lying around the house).

Source: https://pin.it/7tvdddxd7gvqjb

Have any tips or recommendations? Comment on our Facebook page to let us know (and maybe give us a “Like” while you’re at it)!